All guides

OBS Noise Suppression: How to Remove Background Noise in OBS Studio

Turn on noise suppression in OBS Studio, choose between RNNoise, Speex and NVIDIA, set up a noise gate, and fix a robotic-sounding mic. Plus how to clean a recording you already made.

RemoveBGNoise team · Nov 14, 2026

To turn on noise suppression in OBS Studio, click the three dots next to your microphone in the Audio Mixer, choose Filters, click + and add Noise Suppression. Set the method to RNNoise for the best quality on any computer, or NVIDIA Noise Removal if you have an RTX graphics card. Add a Noise Gate after it to silence the gaps between your sentences.

That takes about a minute and fixes most fan, keyboard and room noise. The rest of this guide explains which method to pick, the settings that matter, the order to put your filters in, and what to do when your voice starts to sound robotic. If the noise is already in a recording, the last sections cover how to clean the file afterwards.

Quick steps

  1. 01In the Audio Mixer, click the three dots (⋮) next to your mic and choose Filters.
  2. 02Click + at the bottom left and add Noise Suppression.
  3. 03Set Method to RNNoise, or NVIDIA Noise Removal on an RTX card.
  4. 04Click + again and add Noise Gate below it.
  5. 05Set the gate thresholds just above your silent noise level.
  6. 06Record 30 seconds of test audio and listen back on headphones.

Does OBS have noise suppression?

Yes, and it's built in. You don't need a plugin for basic noise removal. OBS Studio's Noise Suppression filter offers three methods:

MethodQualityCPU / GPU usePlatformsBest for
RNNoiseGoodModerate CPUWindows, macOS, LinuxAlmost everyone
SpeexBasicVery low CPUWindows, macOS, LinuxVery old or overloaded PCs
NVIDIA Noise RemovalVery goodUses the GPUWindows, RTX cards onlyGaming PCs with an RTX card

RNNoise is a small neural network trained on speech. It needs no settings and removes fans, keyboards, mouse clicks and street noise well. Speex is an older filter that just lowers the level of steady noise. It can't tell a keyboard from a voice, so it struggles with anything that changes. NVIDIA Noise Removal runs on the graphics card's AI cores. It needs an NVIDIA RTX card and NVIDIA's free Audio Effects SDK. Without them, the option is greyed out.

How to turn on noise suppression in OBS

  1. Find your microphone in the Audio Mixer dock. It's usually called Mic/Aux, or whatever you named the source.
  2. Click the three dots (⋮) next to it and choose Filters. You can also right-click the source in the Sources dock and choose Filters.
  3. In the Filters window, click + at the bottom left of the Audio Filters list and choose Noise Suppression.
  4. Give the filter a name, or keep "Noise Suppression", and click OK.
  5. Under Method, choose RNNoise (good quality, more CPU usage). On an RTX card, try NVIDIA Noise Removal too.
  6. Close the window. The filter is active immediately, for streams and recordings alike.

Add the filter to the microphone only. On Desktop Audio, noise suppression would chop up game sound and music, because it's built to keep voices and remove everything else.

Settings for each method

  • RNNoise has no settings. It's either on or off.
  • Speex has a Suppression Level slider. The default of -30 dB is a good start. Move it towards -20 dB if your voice sounds thin, and towards -40 dB only if noise is still audible.
  • NVIDIA Noise Removal has an intensity slider. Start around the middle. Full strength can clip the ends of quiet words.

Add a noise gate for the gaps between words

Noise suppression lowers the noise. A noise gate silences your mic completely when you aren't talking, so the faint hiss or keyboard clatter between sentences disappears too.

  1. In the same Filters window, click + and add Noise Gate.
  2. Stay quiet and watch your mic's meter in the Audio Mixer. Note where the meter sits with nobody speaking, for example around -50 dB.
  3. Set Close Threshold a few dB above that level, for example -45 dB.
  4. Set Open Threshold a few dB above the close threshold, for example -40 dB. Your voice has to pass this level to open the gate.
  5. Leave Attack, Hold and Release at their defaults (25, 200 and 150 ms) to start with. If the ends of words are cut off, raise Hold to 300 ms.

If the first syllable of each sentence gets swallowed, the open threshold is too high. Lower it by 2–3 dB at a time.

Put your filters in the right order

OBS runs filters from top to bottom, and the order changes the result. A good chain for a voice mic:

  1. Noise Suppression: remove the noise first.
  2. Noise Gate: then silence the remaining gaps.
  3. Compressor: even out loud and quiet moments.
  4. Limiter at about -1 dB: stop peaks from clipping.

Drag a filter in the list to reorder it. Putting the compressor before noise suppression is a common mistake. The compressor lifts the quiet noise first, so the suppressor has more to remove.

Test your mic before you go live

You can't judge noise suppression while you're speaking, because your own voice drowns out what the audience hears.

  • Quick test: start a recording, talk for 30 seconds with your usual noise (fan on, typing, mouse clicks), stop, and play the file back on headphones.
  • Live listening: open Edit › Advanced Audio Properties, set your mic's Audio Monitoring to Monitor and Output, and listen on headphones. Pick the monitoring device under Settings › Audio › Advanced. Switch monitoring back to Monitor Off afterwards, or viewers may hear an echo.

Fixing common problems

Your voice sounds robotic or underwater. The suppression is too strong. With Speex, move the slider towards -20 dB. With NVIDIA, lower the intensity. Also check for a second noise remover: Windows "voice clarity" or communications effects, your mic's own software, or NVIDIA Broadcast all stack on top of OBS. One noise remover sounds better than two.

Keyboard and mouse clicks still come through. Switch from Speex to RNNoise or NVIDIA, which recognise clicks as non-speech. Then let the noise gate close between sentences. Turning a cardioid mic so its back faces the keyboard helps more than any filter.

The ends of words are cut off. That's the gate, not the suppressor. Raise Hold or Release, or lower the Close Threshold.

Audio drifts or crackles after adding the filter. RNNoise needs some CPU. If your computer is already maxed out by a game and an encoder, try NVIDIA Noise Removal on an RTX card, or Speex as a fallback.

Electrical hum or buzz. Noise suppression handles hum poorly. Find the cause first: a ground loop, a cheap USB hub or a phone charger near the cable. If you can't, our guide to removing static, hum and buzz from audio covers the options.

OBS noise suppression plugins

The built-in filter is enough for most streams. Two kinds of add-on are worth knowing.

VST plugins. OBS can load VST 2 plugins with its VST 2.x Plug-in filter. A popular free choice is ReaFIR from Cockos' ReaPlugs. In Subtract mode, it learns a profile of your exact noise. Turn on Automatically build noise profile, stay silent for a few seconds, then turn it off again. This works well for a constant noise such as a fan or an air conditioner.

Virtual microphones. Krisp and NVIDIA Broadcast run outside OBS and create a cleaned-up virtual microphone. Pick it as your mic in Settings › Audio, then remove any noise suppression filter from OBS so you don't process the voice twice. The advantage is that Discord, Zoom and your browser get the same clean mic. The downside is one more app running in the background, and Krisp's free tier has usage limits.

Already recorded? Clean the file afterwards

OBS filters only work on live audio. They can't fix a recording you've already made. If you notice a fan, traffic or a loud keyboard in a recording after the fact, you have two options:

  • Edit the audio in a video or audio editor. Our guides cover Premiere Pro, DaVinci Resolve and Audacity. Audacity only works on audio, so extract the audio from the video first, or use the other two.
  • Upload the recording to an online noise remover. Our video noise remover accepts the MKV and MP4 files OBS saves. It removes the background noise with AI and returns the video with a clean soundtrack, or only the audio as MP3 or WAV.

If music is playing behind your voice in a clip you want to post, the background music remover takes the music out and keeps the speech. For voice-overs and podcast audio recorded in OBS, the audio noise remover handles MP3, WAV and M4A files.

Record cleaner audio in OBS

  • Get the mic close. A mic 10–15 cm from your mouth picks up much more voice than room. Noise suppression has less to remove and sounds more natural.
  • Use a dynamic or cardioid mic and point its back at the keyboard and the PC fan.
  • Set your level first. Speak at streaming volume and aim for peaks around -12 dB on the OBS meter. A mic that's too quiet, boosted later, brings its noise up with it.
  • Record your mic on its own track. In Settings › Output › Recording, enable more than one audio track, and in Advanced Audio Properties, put your mic on a separate track from game audio. If you need to clean it later, the voice isn't mixed with the game.
  • Turn off double processing. Use one noise remover, in OBS or in a virtual mic, not both.

Frequently asked questions